? Pilot valve to restrict system pressure (control oil internal only)
? Can adjust by controlling the coil current according to the characteristic curve and the selected electronic control unit
? Solenoid type Imax=0.8 A or 2.5 A
? In the event of electronic control unit failure, the overload protection can function to the highest degree (coil current > Imax)
? Used in valve sub-plate mounting, installation hole follows ISO 441-03-02-0-94，
? Cable sockets follows DIN 43650-AM2
? External electronic control unit with ramp and valve adjustment function VT-SSPA1-508/525-L2X/V0/*
| General | ||||||
| Construction | Pilot stage | Poppet valve | ||||
| Main stage | Spool valve | |||||
| Actuation | Proportional solenoid without position control, external amplifier | |||||
| Connection type | Subplate, mounting hole configuration NG6 (SIO 4401-03-02-094) | |||||
| Installation position | Optional | |||||
| Circumstances temperature range | ℃ | -20 to +50 | ||||
| Weight | Kg | 2.2 | ||||
| Vibration resistance, test condition | Max. 25 g, shaken in 3 dimensions (24 h) | |||||
| Hydraulic ( measured with HLP 46, oil = 40℃ ±5℃ )： | ||||||
| Pressure fluid | Hydraulic oil to DIN 51524...535,other fluids after prior consultation | |||||
| Viscosity range | recommended | mm2/s | 20...100 | |||
| max. permitted | mm2/s | 10...800 | ||||
| Pressure fluid temperature range | ℃ | -20 to +80 | ||||
| Maximum permitted degree of contamination of pressure fluid Purity class to ISO 4406 (c) | Class 18/16/13 | |||||
| Direction of flow | See symbol | |||||
| Max. setting pressure （at Qmaxx = 1 L/min） | bar | 80 | 180 | 250 | 315 | |
| Min. settable pressure（當(dāng) Qmin = 1 L/min） | bar | 7 | 8 | 9 | 10 | |
| Max. operating pressure | bar | Port P：315 | ||||
| Port T：250 | ||||||
| Max. mechanical pressure limitation level,e.g. when solenoid current I>Imax | bar | < 90 | < 190 | < 260 | < 235 | |
| Pilot oil flow | L/min | about 0.6 | ||||
| Max. flow-rate | L/min | 40 | ||||
| Electrical data | ||||||
| Cyclic duration factor | % | 100 ED | ||||
| Degree of protection | IP 65 to DIN 40050 and IEC 14434/5 | |||||
| Solenoid connection | Plug-in connector to DIN 43650/ISO 4400，M16X1.5(2P+PE) | |||||
| Valve with solenoid type | 0.8A | 2.5A | ||||
| Max. solenoid current | Imax | 0.8A | 2.5A | |||
| Coil resistance R20 | Ω | 22 | 3 | |||
| Max. power consumption at 100% load and operating temperature | VA | 25 | 30 | |||
| Static/Dynamic | ||||||
| Hysteresis | % | ≤ 4 | ||||
| Range of inversion | % | ≤3 | ||||
| Manufacturing tolerance for Pmax | % | ≤10 | ||||
| Response time 100% signal change | ms | On 200 / Off | ||||
ADD: Address: No. 81, Zhuhang Road, Minhang District, Shanghai（Shanghai Lixin Hydraulics Co., Ltd.)
TEL: 021-31616718 Tel: 021-31616718, ext. 8000 ( reception )
? 2023 Shanghai Lixin Hydraulics Co., Ltd. copyright hu13042344
